Anyone Dyno'd a "stock" 07' Speed3?

[Hoyts Toy]

Has anyone Dnyo'd their New "stock" Speed3 yet?

If so, please post your Dyno chart results.

Thanks!

[Tyler]

I know Matt has - im sure he'll see this topic and post up...If you can't wait, do a search in the ms3 forum :)

[Raider]

Yeah, he got like 232 hp on a dynojet.

[Boostd 3]

Yes, on the Dynojet with less than 300 miles on it, not even enough time to really break in and hold boost at higher rpm's and it hit 231hp and 261.1tq at the wheels. That comes out to exactly 10%driveline loss in hp and about 7% loss in torque. That is about what is expected to lose in front the crank to the wheels. Will have more dyno's done as mods are installed. Would like to have one done with just the CPE CAI and the turbosmart BOV, recirculating. And seperate dyno's after the intercooler and exhaust. We'll see. At that point it will need the EMS to lean it out. Runs very rich.

[MS3kendall]

A buddy of mine and I took our MS3 to a dyno (dynojet) and @ 89 degrees/40% humidity with just one catalytic/resnonator removed we put down 260 FWHP/265 TQ. Yes, the car does run rich! At about 4200-4300 rpm the fuel curve begins to take a nose dive and eventually plummets to about 9.0. But there is some good news regaring this, I noticed the CPE CAI results that Cullen posted actually aided in leaning out the fuel curve a little. If you have not seen the dyno results search for them in this forum and see what i'm talking about. We will be installing out CAI this weekend and will be sharing the results with all of you and post the dyno sheet from our previous runs with just the straight pipe (note: we still have one cat and two resonators in place). The MS3 has way more potential than others think. Props to Mazda for finally bringing something that has alot of power and does not hurt your pocket in the process. With the aid of Street Unit being on top of things and their good service you will be enjoying all the latest parts and accessories. Enjoy and will be keeping all of you up-to-date with the progress on the MS3.
PEACE

[Raider]

Here are the dyno results with the CPE intake. Stock baseline is on the sheet for comparison.

http://www.streetunitforum.com/attachment.php?attachmentid=770&d=1170818179