Hydraulic Clutch linkage JDM (H22)

[BLACK OUT 3]

My clutch has been fine no slips at all and one days I get in my car and its only going in a couple gears and there was hardly any resistance onthe clutch... I think its the hydraulic clutch linkage how much is that and labor?? well a good price

[Cullen]

This guy needs some help

[schmidty]

My clutch has been fine no slips at all and one days I get in my car and its only going in a couple gears and there was hardly any resistance onthe clutch... I think its the hydraulic clutch linkage how much is that and labor?? well a good price
Look at your slave cylinder. It is on the front of the trans,(follow your clutch lines to it) you can see it has a dust boot on it. Slide the boot back and see if there is fluid in there. If there is it's leaking and you need a new slave cylinder. If thats not the case just track your clutch lines back to the master cylinder and make sure there is no leaks anywhere else. If all is dry you may have a clutch problem. But look for leaks first.

[BLACK OUT 3]

thanks for the reply

[schmidty]

And to change a slave cylinder is easy if you have experience with cars. But if you don't i would see it taking no more than a hour to do plus part cost.