Tyler
10-28-2006, 06:37 PM
Well - right before I started installing these, I found this nice video how-to from hspn :D. This is what I used to install, pretty easy overall, and I'm very pleased with the results! I got the ones with the blue RallyArmor text and logo :D.
PART 1 (Front) (http://videos.hspn.com/?videoid=42&catid=14)
PART 2 (Rear) (http://videos.hspn.com/?videoid=43&catid=14)
Some notes:
1. If you don't want to jack the car up or have a lift, you NEED a shallow 90 degree screwdriver. They're 2 bucks @ HomeDepot, its worth it.
2. Clean the part of your fender that's painted before install, I put some 3M rubber weather stripping between the flap and the fender to prevernt scratching.
3. You don't end up using any of the plastic clips that come out of the fender at all, (except for the 4 that you remove from the bottom of your side skirts), so if you have to break them to get them out, no worries.
4. Don't overtighten the screws! They'll start to wear through the fender and flap, which = bad.
5. My setup came with 2 extra long screws and 1 extra clip for the rear and front flaps, very nice.
Overall, install took about 30 mins in the driveway. Questions are welcome! Let me know if you want any pics of anything else specific. I really liked the vid how-to, maybe Ill have to get a tripod...:D.
PART 1 (Front) (http://videos.hspn.com/?videoid=42&catid=14)
PART 2 (Rear) (http://videos.hspn.com/?videoid=43&catid=14)
Some notes:
1. If you don't want to jack the car up or have a lift, you NEED a shallow 90 degree screwdriver. They're 2 bucks @ HomeDepot, its worth it.
2. Clean the part of your fender that's painted before install, I put some 3M rubber weather stripping between the flap and the fender to prevernt scratching.
3. You don't end up using any of the plastic clips that come out of the fender at all, (except for the 4 that you remove from the bottom of your side skirts), so if you have to break them to get them out, no worries.
4. Don't overtighten the screws! They'll start to wear through the fender and flap, which = bad.
5. My setup came with 2 extra long screws and 1 extra clip for the rear and front flaps, very nice.
Overall, install took about 30 mins in the driveway. Questions are welcome! Let me know if you want any pics of anything else specific. I really liked the vid how-to, maybe Ill have to get a tripod...:D.