View Full Version : Kerry's KA-T 240SX...
Cullen
09-10-2006, 10:31 AM
Motor is in! It is a beast.
PHOTOS
http://www.streetunitpics.com/Streetunit-240sx?page=1
StreetUnitMike
09-27-2006, 10:26 PM
Kerry should get in here and post everything about his car!!
Lets see the pictures Kerry...?
MrKA-T
10-01-2006, 09:51 AM
lets see so far I have ....built motor..forged weisco pistons 8.5:1 bored .20 over. cometic head gasket 1mm...port an polished head with a 5 angle valve job. one piece drive shaft. converted from auto to manual with a centerforce clutch. Megan racing short through shifter. Megan racing 3" downpipe and test pipe. Greedy 3" evott exhaust. koyo aluminum radiator. converted electric fan. no more fan clutch.Tein s-tech. tein pillowball mounts.kyb struts and energy suspension bushings..that's about it... that what's on the car..but I also have waiting to be put on a t04b turbo...555 injectors, z32 MAF sensor, hks bov, tial external 38mm wastegate, a 24x12x4 intercooler, and a-vcr, s-afc. I will soon have the revhard manifold and greddy manage ultimate. thas all I need for the turbo kit. I am only going to boost about 11psi at first..should be around 300 whp. its going to be a fun car to drive.I'll post pick soon.
more pics.....!!!! let see some drifting pictures.....?
Tyler
10-06-2006, 08:11 PM
Ive always loved the look of that greddy muffler, what is it called/what exhaust does it come with?
StreetUnitMike
10-06-2006, 08:26 PM
EVO TT right?
MrKA-T
10-07-2006, 08:50 PM
yeah its the evott with the megan racing downpipe and test pipe.
Drift pics will be soon. getting use to the manual.
Boostd 3
10-11-2006, 08:37 PM
One of the guys at work said he has a JDM intake manifold for the SR20. I don't know enough about what you have done to yours to know if it would fit or not, or if it would work or have advantages once the turbo kit is done. If it is something that you are interested in, call Cullen or let me know. Just a thought. Car looks phenominal though. Very sweet. Maybe you'll let me check it out some day.
MrKA-T
10-26-2006, 06:19 AM
pics of the turbo setup
http://www.streetunitpics.com/Streetunit-240sx?page=4
Boostd 3
10-26-2006, 07:18 PM
Will you have it in by this weekend???????????
Maybe we can find an empty parking lot for you to practice drifting like you had previously mentioned.
MrKA-T
10-26-2006, 10:06 PM
no still need fuel pressure regulator, intercooler pipes, and oil lines. soon though :)
MSP608
11-02-2006, 06:21 PM
call me a noob, but whats the difference between the ka24de and sr20det other than size and turbo...or is that the only difference?
MrKA-T
11-02-2006, 07:14 PM
First off both motors are very good motors. the Sr is the cheaper way of going unless you plan on throwing a turbo on a 150,000 mile engine. the biggest difference is displacement. the sr has a aluminum block and is 2.0L the ka is iron and has is 2.4L. the sr is lighter but the ka produces a lot of torque. most of the time iit produces more torque than HP. On the heavy 240's torque is a good thing. There are a lot of battles with the ka vs sr. with the sr for about $3000.00 you can buy a full front clip and swap everything into the 240 and be 200 hp. Using my car for example I will have $5500.00 into my ka and turbo setup and should be around the 300 rwhp mark. I will be boosting 12psi to get that number. the sr will need to run about 20psi for the same. the downfall to the ka is tuning...you can blow the motor very easily at those numbers. the sr comes turbo'd from factory. So it is a lot easer to tune the sr. My friend at work has a sr with about $20000.00 it mods. I am going to race him as soon as I have the turbo in. I will have more Hp and torque but his car spools hella fast...so well see ;)
Wiggum
11-02-2006, 10:38 PM
Who had the 240SX with the massive IC there today???
Thanks again BTW, how was the test drive???
MrKA-T
11-03-2006, 06:15 AM
that was davids car...he is the one with the sr motor. we both have the same intecooler :) the test drive was good. the HKS BOV sounded good. It was no problem at all. its fun seening new products for the car. keep up the good work...
My friend at work has a sr with about $20000.00 it mods. ;)
God damn...Dave had that much invested in the engine? Or is that on the whole car itself?:confused:
M62 Power
02-16-2007, 07:57 AM
car looks good i love those years in a 240
Kinda like my 240 setup.
It's nice.
MrKA-T
02-16-2007, 07:29 PM
Well the ka is coming out. I have a SR sitting in my bay at work in pieces. It will be going in in the next few weeks. :D wish me luck
vBulletin® v3.8.2, Copyright ©2000-2012, Jelsoft Enterprises Ltd.